- Wire Rope Products
Wire Rope Products
- Lifting Slings
- Cargo & Ratchet straps
- Fittings
Fittings
- Fibre Rope
- Tools
- Assemblies
- Balustrade Wire
- BLOGS
- CONTACT
Load binders provide a convenient way of securing loads on a vehicle with the use of steel chain.
There are two key types of load binder, the simplest in terms of design is the lever load binder, although more physical effort is required to operate than the second type – the ratchet load binder.
The ratchet load binder variety uses a ratchet and pawl method to crank the chain tight, this method reduces the amount of physical effort required.
N this category you will also find chain and hooks for use with our load binders as well as simple tie down rope.
POA
About Lever Load BindersStandard lever load binders are a convenient way of secu..
POA
Use ratchet chain binders for securing loads the easy way.Ratchet chain binders ..
POA
Chain & HooksChains & hooks along with load binders are commonly used by..
POA
More information about Tie Down RopeYou may have noticed that this type of three..
A lever load binder incorporates two hooks which are used to fit to a link in the chain used as the cargo restraint. There will need to be some slack in the chain to do this. Attach the hooks into chain links some distance apart, then the lever can be pulled which will pull these links towards each other, thus tightening the chain over the load. See the images on the lever load binder product page for further clarification. Once you are happy and the load is secure the lever should be secured back to prevent and snap back/recoil. You can anchor the lever back with a piece of rope or wire or similar.
The ratchet variety of load binder works in a similar way to the lever load binder when fitting. However it is much easier to use and tighten thanks to the ratchet mechanism. Simply crank the lever back and forth to pull the hooks and chain together. There is no risk of snap back or loosening with this type.
Along side our load binders we can also supply chain with safety hooks in the many sizes and lengths. 8-10mm or 10-13mm chain is typically used for standard lever load binders. Ratchet chain binders have a wider range of chain size options, typically up to 16mm, thus will suit heavier loads.
Our tie down rope is a three strand split film polypropylene and can be supplied in any length up to the full 220 metre coil. There is also a choice of rope diameter which ranges from 4mm up to 12mm. Find out more in the product page above.